Instructions for setting up reception of the TV channel Curlers on the T2 network

In order for the Curler to be included in the channel list of your TV/receiver (to set up the Curler reception), you need to rescan the TV channels.

Here is an instruction on how to do it.

The instruction is universal and for a specific model of receiver/TV, some menu items or settings may differ from those specified in the instruction.

So:

Before starting the setup, make sure that you have a terrestrial TV signal and that the terrestrial antenna is correctly set up;
To do this, check whether your receiver/TV receives 1+1, UNIAN, UA:PERSHYI, Rada TV channels, as the Bigudi TV channel broadcasts on the same frequency as these channels;
If you can watch 1+1, UNIAN, UA:PERSHYI, Rada TV channels, your TV/receiver is ready to receive Bigudi TV channel.
Setup procedure:

Press the "Menu" button on the tuner/TV remote control. Go to the "Settings" menu (also called "Options");
Go to the "Channel Search" section (also known as "Broadcast" or "On Air Menu");
Select "Auto Search" (also called "Auto Tune") and click "OK". After that, the channel scanning process will start. The scanning procedure may take several minutes;
When the search is complete, press the "OK" button again to save the search results.
If the settings are correct, the TV channel will appear in the channel list of the receiver/TV. In addition, the 1+1 Ukraine TV channel should also appear in the list, if it was not there before.

If you do not know how to configure the receiver yourself or if the TV channel does not appear in the channel list, try other configuration options: 

contact a specialist TV technician;
ask your neighbours or friends who have already set up the receiver or know how to do it;
fill in the questionnaire https://media.1plus1.ua/tv-business and get expert advice.